1961 – 68 Dodge Truck Glove Box Installation
Sweptline & Co.If you own a classic Dodge D100 from 1961 to 1968 and are looking to upgrade your glove box, this straightforward installation is just what you need. Whether you're undertaking a full restoration or simply aiming to enhance your dashboard's functionality, this pre-assembled glove box is designed for an easy fit with minimal tools required.
What’s in the Box?
Your Sweptline & Co. glove box package includes:
-
A fully assembled glove box
-
A complete set of installation screws
This streamlined setup ensures a hassle-free installation process, ideal for DIY enthusiasts of all skill levels.
Tools You’ll Need
- A stubby Phillips head screwdriver
Please note: We recommend using hand tools only for this installation.
Installation Process
Follow these simple steps to install your new glove box:
1. Remove Existing Screws
Begin by removing the two outer screws from the glove box door, and then loosen the two center screws. Leaving the two center screws will in and loose will help with alignment and fitment of your new glove box.
2. Align the Glove Box
Insert the glove box from the underside of the dash, inserting the bottom lip slightly before sliding the top into place.
3. Secure with Screws
Once aligned, start by inserting the two 8-32 screws and threading them in about halfway. After installing the top two screws, proceed to install the bottom screws in the outer positions of the glove box door. A little pressure may be required to bring the glove box into the correct position, this is normal. Now that you have all the screws started, start by tightening the four bottom screws then finish installing the two top screws.
4. Final Fit Check
Ensure that all screws are tight and close the glove box door. Your new glove box installation is complete!
Watch the full video tutorial on Youtube HERE.
Join the Sweptline & Co. Community
After completing your installation, tag us on Instagram or Facebook to show off your new glove box.
Have Questions?
If you encounter any issues or have questions during the installation process, don't hesitate to send us an email HERE.
If you haven’t picked up a glove box yet, you can grab one HERE.